How To Repair Wt5170 Lg

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back afterward if yous even so haven't plant the answer you need.

LE Mistake Message and won't spin pulsate properly

I first tested the motor per the service manual. I checked the resistance between the terminals of the iii pin connector. Information technology's supposed to be 5-15 ohms. The motor checked out and so I replaced the chief electrical board. It turns out that wasn't the problem. Subsequently a brief web search I found out that the hall sensor (which is attached to the motor stator) was the probable cause of the failure. I replaced that and everything works dandy at present. And now I accept a spare main lath in case that ever fails. I as well want to mention that I took the time to remove the dispenser box (where the water comes in and is directed to the different cleaning products) and cleaned it with a very strong bleach solution. It got rid of the mildew and funky smell. It seems that the fabric softener acquired a lot of mildew to form inside the dispenser straight above the fabric softener tray. The bleach took care of that. This is probably something that should be done routinely to go on the mildew from forming.

Parts Used:

• 
• 
• 

  Total Repair Time:

  xxx - 60 mins

• 

  Tools:

  Screw drivers, Socket set

216 of 279 people institute this instruction helpful.

Was this teaching helpful to yous?

Thank you for voting!

LE fail code

Removed back of washer with screw driver, Removed outer motor embrace with a 17 mm socket (1 commodities), Removed motor stater using 10 mm socket (8 bolts). Left motor plugged in and and tipped to the side exposing the sensor. Unplug and snap off sensor. Reassembled in opposite order. Machine works great. Very easy fix, and perfect fit on role.

Parts Used:

• 
• 

  Difficulty Level:

  Really Like shooting fish in a barrel

• 

  Total Repair Time:

  30 - 60 mins

• 

  Tools:

  Spiral drivers, Socket set

17 of 17 people found this teaching helpful.

Was this instruction helpful to yous?

Give thanks you for voting!

"Le" Fail Lawmaking on digital brandish ... Washer would not arouse and fabricated an odd noise.

I first thought there was a mechanical problem but later checking everything mechanical I discounted that idea ... I researched and plant out from others with a similar problem that the Le code brandish was probably a sensor problem ... I ordered a replacement sensor ... With the new sensor available, I removed the access panel to the back of the machine (phillips head screw commuter - 4 screws) ... Remove the exposed motor half (1 bolt - 17mm scocket) ... Loosen the motor stator that has the wired coils (10mm socket - 6 bolts) ... Hold motor unit of measurement to the side without disconnecting the wiring harness ... Disconnect the sensor wire connector and remove the old sensor ... Prune the new sensor in identify (aforementioned position as the old one) and re-connect ... Opposite the assembly procedures ... This fixed the problem and the washing car works like a new ane ... The wife is HAPPY!

Parts Used:

• 
• 

  Difficulty Level:

  Actually Easy

• 

  Total Repair Time:

  30 - 60 mins

• 

  Tools:

  Screw drivers, Socket prepare

10 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Cheers for voting!

How To Repair Wt5170 Lg,

Source: https://www.partselect.com/Models/WT5170HW/

Posted by: shumwayarlither1978.blogspot.com

Share this post